![viewdo600rr](/img/default-banner.jpg)
- 7
- 657 675
viewdo600rr
Приєднався 27 бер 2008
HID Install 600rr
Kit from xenonrider.com
If you want to purchase this exact kit you can go to this link directly
www.xenonrider.com/h7_hid.shtml
Side fairings were not removed in the video due to youtube 10 min time restriction on videos. If you want to see how to remove the side fairings check out the proton installation video.
If you want to purchase this exact kit you can go to this link directly
www.xenonrider.com/h7_hid.shtml
Side fairings were not removed in the video due to youtube 10 min time restriction on videos. If you want to see how to remove the side fairings check out the proton installation video.
Переглядів: 45 904
Відео
Gas Cap Removal 600rr 07
Переглядів 44 тис.15 років тому
WARNING A little safer to remove the unit from the bike first so you dont drop anything in the gas tank. How to remove your tank lid/unit on a CBR 600rr 07-09 Reverse steps for reinstallation. "Hot swap. Get a gas cap sent to you so you can swap it out with yours for $60. $35 will be refunded when we get your stock mint condition gas cap with all bolts returned to us. Same price in the end but ...
Tripage Knight Rider
Переглядів 17 тис.15 років тому
Knight rider kit by tripageled.com Video shows knight rider with 3 options 1.off 2.white LED's 3.red knight rider Kit shown is $135 installed in your 3rd eye. Please contact www.TripageLED.com directly.
Proton flush mount installation
Переглядів 59 тис.16 років тому
Installation for Proton flush mounts on 07 cbr 600rr. Note: Strobe effect on video does not really reflect what it looks like in person.
Tripage LED Fender Eliminator Installation
Переглядів 95 тис.16 років тому
I purchased this kit from tripageled.com I believe their page is going through reconstruction so if you don't see this item up there then contact them through the website. The kit comes with -License frame(with light bar) -Mounting hardware for your exhaust -All screws needed This kit is installed along with the CA(Clear Alternatives) tail light. You can send your exhaust bracket in to be drill...
07 CBR 600rr CA integrated tail light installation
Переглядів 128 тис.16 років тому
Integreated tail light installation for 07 cbr 600rr. If you want the full resolution pictures email me and i'll send you a link.
Where can I buy the resistor?
Hey i did this but my brake light doesnt work only my blinkers work???? Help pls
What about the brake light wires?
Nice. Worked for me
I have plug & play integrated light but for some reason it keeps burning my ground wires 3 times now I have had to go thru the bs work of replacing ground wires I’m sick of it so I u plugged my lights idk what’s going on
I just got a bike and it did not come with tail lights and I never hooked up tail lights before and this did not show me that shit. I tried the yellow wire and the other yellow wire to the orange and blue and it didn't do shit.They didn't have no power to her or nothing.
I gotta he honest. That put a huge smile on my face. Who doesn’t love Kit! I love it!!
It appears that he headlight assembly does not need to be removed... is that correct. I ask because I’m installing a new hid kit but one already is installed. No need for me to remove the whole housing ?
OOOOOOOOOh post the rubber seal...
so my 06 cbr 600rr has hid's but only the high beam works and the low beam does not work at all.
How to make yourself less visible to drivers with their head up their ass... use an integrated LED tail light. Just hope there isn't a car in front of you when someone hits you from behind.
Thank you! My bike key is a little bent from the previous owner and I got my key stuck in the cap and had no idea how to get it out. Squeezing the center together right before you took out your key did the trick. Did not know that. Awesome!
can you tell me how you connect the wires. i am trying to do it on a r6 00 but the first own cut out the connector and everything is a mess.
The tail lights were already integrated and then he removed them to put on another thing I don't know the name of. I wanted to how how you install tall turn signals, not what ever the fuck he put on. Pls halp.
resistors how many watts or ohm?
Would this work for a 94 cbr600
Bought 03-06 cbr600rr integrated tailligt from ebay doesn't fit my 07 cbr600rr
josh w is it the Kratos ones on amazon? I have an 07 cbr600rr and I was wondering if it would fit on my 07. www.amazon.com/gp/aw/d/B0052O8DCG/ref=ox_sc_act_image_4?ie=UTF8&psc=1&smid=A18132C77AG5IR
what fender eliminator do you have ? and where can i get that plug and play resistor you have ?
@atxmatt23 the song in this is called "Dictaphone's Lament"
Hey, just curious, I see you mounted your ballest under your voltage regulator, did you have any issues with it over heating? ever have to move them?
May I ask why you need to warm up the chain before you wax it?
Like everything else, when a chain warms, all of the parts expand and separate, allowing the cleaner, and the lubricant to get into the places it couldn't normally when the chain has been sitting.
so simple when you actually think about it.. thank you for that my friend!
Nice, short and crisp.
As soon as I heard Tycho I was like aww sheeeiiitttt!
Wow that really cleans up the look of the bike. Gonna buy one of these.
Just want to say thanx your video helped tramendusly i did an hid xenon kit on my 2011 600rr
what do you use to clean up the kerosene on the chain before apply wax ? do u just use a clothe to wipe them or .. ? if the kerosene or wax spilled on the tyre will it be bad for the tyre ?
What did you put on the back of your light? I'm referring to the thing you stuck on it.
so what you have to do to the rear fairing for the light fit very well, cos i bought one and at the end of the fairing there is pretty much space, so what do you do, i see secure it with tape but then? thanx...
use putoline ceramic chain wax its a non fling and nothing sticks to it
I only use Duponts Teflon for o-ring lubrication. Another note: Wipe any excess lube whether it be chain wax or teflon because that's what attracts dirt... :)
Interesting. Not doubting you but where did you get your information from about WD-40 penetrating the o-ring seals?
No, WD-40 does not hold dirt. It's a water displacement solvent not some sticky lube.
can you send me high res pictures please!
3:20 I am a complete newbie when it comes to wiring. I made a custom fender eliminator and i need a license plate light. I purchased two led screw lights is it possible to run x4 wires off of the original harness? ex. Red,black x2 from each of the license plate screws so 4 wires in total. 2 to the black ground, and 2 to the running light? will it work? thanks
Thanks, you video was very helpful for my CBR 1000RR 04. Many people are asking for the wire connectors, just cut them off the OEM indicators. Thank you for mentioning which wire goes where (green to black, white orange/blue to red). Connect orange/light blue wire to orange on proton light wire for regular indicator, yellow wire for strobe effect and both for fading effect THANK YOU AGAIN!!!
can these things be painted or powdercoated easily?
Never mind I had the blinker and running light wires back-wards.
I got my protons installed, but they won't turn off, any suggestions? Even when I go to put the turn signal on or try to turn it off they still flash.
i had install my blue hid lights but why is my hi beam bright white and not blue????
doing my flush mounts/air filter tomorrow. my major concern is the fairings... breaking them or not being able to get them back on... they just look like a bitch to deal with.
The big it's reson that WD40 will harm a chanin is because it hold on to deart
after some reading kerosene or a branded chain cleaner as the best options. most other DIY methods damage the rubber o rings within a chain. WD40 is ok on the rubber itself. the problem with WD40 is modern chains have grease inside them and the WD40 makes its way past the o rings and breaks this grease down because of its penetrating properties. hope this helps
how much did you pay for tail light???
It looks like a huge pain in the ass
You mentioned heating up the chain with a short ride, couldn't you have just ran the rear wheel with the motor while on the stand? Or was the buildup of exhaust fumes the issue -how long exactly is the "short" ride?
did all this but have yet to put the plate bracket that it comes with on...not sre where the screws go exactly..yours looks to be in a diff location from where the picture instructions that they give tell us to...any suggestions?
I also find it a good idea to warm my can of wax spray in warm water before appying.
i want buy ! what website?
tycho is the shizz, good choice, guessing your from near the bay area
clymer suggests using kerosene to clean o ring type chains, still needs lube tho